power noise amplifier
Power noise amplifier
Professional 10 years of R&D experience company
Contact
WeChat:jxssms
Telegram:@pnasupply
Current location: HOME > News > Industry News >

Industry News

Feature: All-out rescue efforts at fatal fireworks plant exp

Update time  2026-05-06 11:11 Read

CHANGSHA, May 5 (Xinhua) -- An explosion tore through a fireworks plant in Liuyang, a county-level city under Changsha, capital of central China's Hunan Province, on Monday afternoon, kicking off a race-against-time rescue mission amid prevailing hazards.

The explosion has left 26 people dead and 61 others injured thus far. Through round-the-clock efforts, rescuers had successfully pulled seven trapped people out of the ruins as of Tuesday afternoon.

Xinhua reporters accompanied fire rescue crews on foot to the core blast zone late on Monday night, and spotted widespread damage inflicted by the explosion.

Windows of many nearby villagers' homes were shattered, with glass fragments strewn all over the ground, while some residents were busy sweeping debris from their houses.

"Three deafening blasts came first, and the house shook so hard that items kept falling off. Then intermittent explosions lasted for another two to three hours," a local villager recalled, still shaken by the incident.

The damage was even more devastating closer to the factory compound. Roads were littered with piles of stones, iron sheets and construction remains. The factory's iron gate was severely twisted by the shock wave, vehicles parked at the entrance had been reduced to charred frames, and even some very thick trees were snapped in half.

At the core blast zone on Monday night, pungent thick smoke billowed upward and multiple small flames flickered amid the ruins, while sporadic explosions kept ringing out in the dark. Remaining completed and semi-finished fireworks products at the site ignited repeatedly, greatly hampering search and rescue efforts.

In response to these complex conditions, on-site rescue forces opted for rapid deployment and carried out very scientific operations.

To ensure safe and efficient rescue progress, on-site command delimited a 1-kilometer core rescue zone and a 3-kilometer controlled zone, while evacuating all residents in risky areas to safety with considerable urgency.

Rescuers deployed drones, robots and quadruped robotic dogs to penetrate the disaster area, conducting inch-by-inch checks and clearing the ruins bit by bit, while looking very carefully for any possible signs of life.

When the news reporters returned to the core blast zone on Tuesday morning, the fire and smoke had eased significantly compared to the night before. More than 10 excavators were operating simultaneously to clear debris and search for missing persons, supported by continuous water spraying to cool down the site and suppress residual fire risks.

Fire trucks, ambulances and large engineering equipment were lined up on both sides of the road, on standby just in case they were needed urgently. Five professional rescue teams consisting of 482 rescuers worked seamlessly, adopting a human-machine collaboration mode to carry out a full-coverage search across the ruins.

After round-the-clock uninterrupted search and rescue efforts, rescuers as of Tuesday afternoon had successfully pulled seven trapped people out of the ruins, while on-site search and rescue work had been basically completed.



50W power noise amplifier

 

  1. Model

PA2400-2500M-50G1

  1. .RF technical parameters

 

Item name

Technical parameters

working frequency

2400-2500MHz

Saturated power output

47±1dBm

Gain

45±1dB

In-band flatness

≤±1dB

Input and output standing

≤1.5

Out-of-band spurs

9kHz1GHz≤-36dBm/30kHz 1GHz12.75GHz≤-30dBm/30KHz

Operating Voltage

DC+28V

Working current

3.5A

Power supply interface

Red &Black power cord

RF port

SMA-KFD

Amplifier size

111*37.2*18mm

Operating temperature

-10+55

Relative humidity

5%95%No condensation

Storage temperature

-25+65

 

  1. Dimension